Stainless-steel knitted wire mesh Demister Pad
Stainless-steel knitted wire mesh Demister Pad
In many process procedures the removal of entrained material within vapour flows is essential. HESLY Knitwire Products provide a broad variety of demister units suitable for any kind of application. The principle of demister operation is based on having a large numbers of obstacles intercepting entrained tiny droplets in a vapour flow. This particular large number of obstacles must offer minimum drop in stress over the removal system.
knitted mesh are made up from knitted components with interlocking asymmetrical streets of metal or plastic material with typical wire diameters being 0. 1 -- 0. 3mm. By cautious choice of wire diameter, Knitwire Products have produced produced mesh demisters with very high free volumes (typically 98-99%) along with very high elimination efficiencies and low strain drop.
Along with wire size and mesh density, another parameter in design as well as operation is the vapour speed. This can be controlled by very careful selection of the mesh region. Optimal area will depend on working temperature, pressure and force drop. Under normal functioning conditions, 99% + removing efficiency can be achieved with a tension drop of less than two hundred and fifty Pascals.
Our technical knitted mesh tube group can offer advice to assure the best performance for your new or even replacement demister.
No comments:
Post a Comment